Danfoss EKC 202 User Manual

EKC 202 Manual RS8DZ602 © Danfoss 08-2010 3
EKC 202A
Controller with two relay outputs, two temperature sensors and
digital input.
Temperature control at start/stop of compressor / solenoid valve
Defrost sensor
Electrical defrost / gas defrost
EKC 202B
Controller with three relay outputs, two temperature sensors and
digital input.
Temperature control at start/stop of compressor / solenoid valve
Defrost sensor
Electrical defrost / gas defrost
Relay output 3 is used for control of fan.
EKC 202C
Controller with four relay outputs, two temperature sensors and
digital input.
Temperature control at start/stop of compressor / solenoid valve
Defrost sensor
Electrical defrost / gas defrost
Control of fan
Relay output 4 can be used for an alarm function or for a light
function.
Alarm function
If an alarm function is required, relay number two may be used for
it.
Defrost is performed here with circulation of the air as the fans are
operating continuously.

Danfoss EKC 202 Specifications

General

Brand	Danfoss
Model	EKC 202
Category	Controller
Language	English