Danfoss FC 301 User Manual

[51] Bahasa Indonesian Part of Language package 2
1-20 Motor Power
Range: Function:
Size re-
lated
*
[0.12-1,600 hp
[0.09-1,200 kW]]
Enter the nominal motor power (in kW) according to the motor
nameplate data. The default value corresponds to the nominal
rated output of the unit.
This parameter cannot be adjusted while the motor is running.
This parameter is visible in LCP if par. 0-03 is
International [0].
1-22 Motor Voltage
Range: Function:
Size re-
lated
*
[10 - 1,000 V] Enter the nominal motor voltage according to the motor name-
plate data. The default value corresponds to the nominal rated
output of the unit.
This parameter cannot be adjusted while the motor is running.
1-23 Motor Frequency
Option: Function:
Min - Max motor frequency: 20 - 1,000 Hz
Select the motor frequency value from the motor nameplate
data. If a value different from 50 Hz or 60 Hz is selected, it is
necessary to adapt the load independent settings in par. 1-50
to 1-53. For 87 Hz operation with 230/400 V motors, set the
nameplate data for 230 V/50 Hz. Adapt par. 4-13
Motor Speed
High Limit [RPM)
and par. 3-03 Maximum Reference to the 87
Hz application.
[50]
*
50 Hz when parame-
ter 0-03 = interna-
tional
[60] 60 Hz when parame-
ter 0-03 = US
1-24 Motor Current
Range: Function:
Size re-
lated
*
[0.1 - 10,000 A] Enter the nominal motor current value from the motor name-
plate data. This data is used for calculating motor torque, motor
thermal protection, etc.
This parameter cannot be adjusted while the motor is running.
VLT
®
AutomationDrive FC 300 Instruction
Manual
4. How to Program
MG.33.A9.22 - VLT is a registered Danfoss trademark 49
4

Danfoss FC 301 Specifications

General

Brand	Danfoss
Model	FC 301
Category	Controller
Language	English