Danfoss Heating
7
GB
1.2 Preset Programmes
Your FP735Si comes ready programmed with a set of operating times
which often suit most people.
If you want, you can change any of these settings by following the
instructions on pages 12 to 17. First follow the steps on page 9 to set
your display preferences.
1.3 Before you start
Open the ap on the front of your
FP735Si. Using a non-metallic object,
press and release the recessed RESET
button (R/S).
NOTE: Your FP735Si features a backlight
on it’s display. Unless this has been
disabled or set to be on all the time, the
rst press of any button will cause the
backlight to come on. In order to action a
function, a repeat press of the button will
be required. All buttons will then operate
as normal until the unit is left untouched
for 2 minutes and then the next button
press will activate the backlight again.
Weekdays (Mon-Fri) Weekend (Sat-Sun)
Event Time Hot Water
and
Heating
Event Time Hot Water
and
Heating
1 06:30 1st ON 1 07:30 1st ON
2 08:30 1st OFF 2 09:30 1st OFF
3 11:30 2nd ON 3 11:30 2nd ON
4 13:30 2nd OFF 4 13:30 2nd OFF
5 16:30 3rd ON 5 16:30 3rd ON
6 22:30 3rd OFF 6 22:30 3rd OFF
To Next Page
Loading...
Need help?
General
