Danfoss Link CC User Manual

Installation Guide Danfoss Link™ CC
28
12/2014 VISGL90N Danfoss Heating Solutions
5.4. Factory reset of Danfoss Link™ CC
!
Danfoss Link™ CC can be reset to factory settings, when all devices are
removed from the network.
Remove the front cover and press and hold the reset button, on the right side of
the Danfoss Link™ CC, until the controller gives an audible signal. All rooms are
now deleted and the Danfoss Link™ CC is reset to factory settings.

Danfoss Link CC Specifications

General

Brand	Danfoss
Model	Link CC
Category	Controller
Language	English