Start of the
measuring
1. Enter Measure.
Notice! Very important!
Before switch On the
bluetooth connection you
have to switch On the
measuring units and wait for
initalisation for 4s (green led
diod stop blinking), after that
switch On the convertor and
again wait for initalisation. In
the last step switch On
bluetooth on your smart
phone. If you don´t do that,
you will not see (not find)
the convertor and measuring units.
2. You need permit Bluetooth
module if you have Bluetooth
module switched off.
3. Select your PFM 5001
convertor.
4. Measuring - Main Window.
18 HEC
To Next Page
Loading...
Need help?
General
