to mains supplies with up to 400 V be-
tween phase and ground.
See Technical data for correct dimensioning of cable
cross-section.
Motor connection
Connect the motor to terminals 96, 97, 98. Connect
ground to terminal 99.
No.
96 97 98 Motor voltage 0-100% of line
voltage.
U V W
3 wires of motor
U1
W2
V1
U2
W1
V2
6 wires out of motor, Delta-con-
nected
U1 V1 W1 6 wires out of motor, Star-con-
nected
U2, V2, W2 to be interconnec-
ted separately (optional termi-
nal block)
No. PE Ground connection
See Technical data for correct dimensioning of cable
cross-section.
VLT
®
2800 Series
18 MG.27.A2.22 - VLT
®
is a registered Danfoss trademark
To Next Page
Loading...
Need help?
General