Danfoss VLT 5000 User Manual

Synchronizing controller
MG.10.N4.02 - VLT is a registered Danfoss trademark 21
1.9
Reset/enable Reset/enable 27
1.10
Not used Hold 29
1.11
Not used Speed/position - 32
1.12
Not used Speed/position + 33
1.13
Measuring master marker
distance
Not used 7
1.14
Measuring slave marker
distance
Not used 8
1.15
Test-run left Not used 32
1.16
Test-run right Not used 33
2
Virtual master reference* Virtual master reference* 53/60
* Only when Parameter 748 = 3.
Field bus status signals:
Field bus
[word.bit]
Test run Synchronizing Corresponding
output / parameter
1.1
Not used Ready 1
1.2
Not used Fault 2
1.3
Not used Accuracy 3
1.5
Saving Saving 5
1.6
Running Running 6
1.7
Not used Home reached 7
1.8
Ready, no error Ready, no error 8
2
Track error Track error P775/797
3
Not used Synchronizing error P797
4
Not used Status of Synchronization P778
5
Slave speed Slave speed P798
6
Master speed Master speed P799

Danfoss VLT 5000 Specifications

General

Brand	Danfoss
Model	VLT 5000
Category	Controller
Language	English