Danfoss VLT AutomationDrive FC 300 Series Operating Instructions

3.1.6 Rated Power
Frame size D1 D2 D3 D4
130BA816.10
130BA817.10
130BA819.10
130BA820.10
Enclosure
protection
IP 21/54 21/54 00 00
NEMA Type 1/Type 12 Type 1/Type 12 Chassis Chassis
High overload rated
power - 160%
overload torque
90-110 kW at 400 V
(380-500 V)
37-132 kW at 690 V
(525-690 V)
132-200 kW at 400 V
(380-500 )
160-315 kW at 690 V
(525-690 V)
90-110 kW at 400 V
(380-500 V)
37-132 kW at 690 V
(525-690 V)
132-200 kW at 400 V
(380-500 V)
160-315 kW at 690 V
(525-690 V)
Table 3.3 Rated Power, Enclosure Type D
Frame size E1 E2 F1/F3 F2/F4
130BA818.10
130BA821.10
F3
F1
130BA959.10
F4
F2
130BB092.11
Enclosure
protection
IP 21/54 00 21/54 21/54
NEM
A
Type 1/Type 12 Chassis Type 1/Type 12 Type 1/Type 12
High overload
rated power -
160% overload
torque
250-400 kW at 400 V
(380-500 V)
355-560 kW at 690 V
(525-690 V)
240-400 kW at 400 V
(380-500 V)
355-560 kW at 690 V
(525-690 V)
450-630 kW at 400 V
(380-500 V)
630-800 kW at 690 V
(525-690 V)
710-800 kW at 400 V
(380-500 V)
900-1200 kW at 690 V
(525-690 V)
Table 3.4 Rated Power, Enclosure Types E and F
NOTICE
The F enclsoures have 4 different sizes, F1, F2, F3 and F4. The F1 and F2 consist of an inverter cabinet on the right and
rectifier cabinet on the left. The F3 and F4 have an additional options cabinet left of the rectifier cabinet. The F3 is an
F1 with an additional options cabinet. The F4 is an F2 with an additional options cabinet.
How to Install
VLT
®
Automation Drive FC 300 Operating Instructions
18 MG33U402 - Rev. 2013-12-16
33

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English