Danfoss VLT AutomationDrive FC 300 Series Operating Instructions

Size/Type Bussmann PN* Rating Alternative Fuses
2.5-4.0 A Fuse
P450-P800, 380-500 V LPJ-6 SP or SPI 6 A, 600V Any listed Class J Dual
Element, Time Delay, 6 A
P630-P1M2, 525-690 V LPJ-10 SP or SPI 10 A, 600V Any listed Class J Dual
Element, Time Delay, 10 A
4.0-6.3 A Fuse
P450-P800, 380-500 V LPJ-10 SP or SPI 10 A, 600V Any listed Class J Dual
Element, Time Delay, 10 A
P630-P1M2, 525-690 V LPJ-15 SP or SPI 15 A, 600V Any listed Class J Dual
Element, Time Delay, 15 A
6.3 - 10 A Fuse
P450-
P800600HP-1200HP,
380-500 V
LPJ-15 SP or SPI 15 A, 600V Any listed Class J Dual
Element, Time Delay, 15 A
P630-P1M2, 525-690 V LPJ-20 SP or SPI 20 A, 600V Any listed Class J Dual
Element, Time Delay, 20A
10 - 16 A Fuse
P450-P800, 380-500 V LPJ-25 SP or SPI 25 A, 600V Any listed Class J Dual
Element, Time Delay, 25 A
P630-P1M2, 525-690 V LPJ-20 SP or SPI 20 A, 600V Any listed Class J Dual
Element, Time Delay, 20 A
Table 3.42 Manual Motor Controller Fuses
Frame size Bussmann PN* Rating Alternative Fuses
F LPJ-30 SP or SPI 30 A, 600 V Any listed Class J Dual Element,
Time Delay, 30 A
Table 3.43 30 A Fuse Protected Terminal Fuse
Frame size
Bussmann PN* Rating Alternative Fuses
F LPJ-6 SP or SPI 6 A, 600 V Any listed Class J Dual Element, Time
Delay, 6 A
Table 3.44 Control Transformer Fuse
Frame size
Bussmann PN* Rating
F GMC-800MA 800 mA, 250 V
Table 3.45 NAMUR Fuse
Frame size
Bussmann PN* Rating Alternative Fuses
F LP-CC-6 6 A, 600 V Any listed Class CC, 6 A
Table 3.46 Safety Relay Coil Fuse with PILZ Relay
How to Install
VLT
®
Automation Drive FC 300 Operating Instructions
68 MG33U402 - Rev. 2013-12-16
33

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English