Danfoss VLT AutomationDrive FC 300 Series Installation Guide

2. Connect the safe output S37 on the safety option to terminal 37 on the control card (maximum length of this wire is 100 mm
(3.9 in)).
1
2
10 mm
e30bd009.11
1
2
3
4
7
6
5
10
8
9
11
12
Illustration 14: Connecting Control Wiring, Example Showing FC 302
3. Connect the control cables to the safety option and relieve the cable by the enclosed cable strips. Follow the guidelines in 4.4.1
Cabling Requirements.
Installation
Installation Guide | VLT®Safety Option MCB 152
AN327351953089en-000101 / 130R0578| 25
Danfoss A/S © 2020.02

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English