Danfoss VLT AutomationDrive FC 300 Series Installation Guide

Parameter Options/valid
range
Default
value
Description Con‐
ver‐
sion
index
Data
type
42-88 Suppor-
ted Customi-
zation File Ver-
sion
0.00–99.99 2.00 Shows the maximum supported configuration file version
(CfgFileVers):
• [0] – the maximum version supported by the safe sys-
tem (drive with the safety option).
• [1] – the maximum version supported by the safety op-
tion.
• [2] – the maximum version supported by the control
card.
-2 u-int16
42-89 Custom-
ization File
Version
0.00–99.99 2.00 Shows the currently used customization file version. -2 u_int16
7.2.5 Parameter Group 42-9* Special
Table 13: 42-9* Special
Parameter Options/valid
range
Default
value
Description Conver‐
sion in‐
dex
Data
type
42-90 Restart
Safe Option
[0] No
[1] Yes
[0] No Select [1] Yes to restart the VLT® Safety Option MCB
152 without power cycling the drive. When the safe
fieldbus is enabled, the communication option is also
restarted.
– u_int8
7.2.6 Parameter Group 600-** PROFIsafe
N O T I C E
Parameter group 600-** PROFIsafe is only visible in VLT® Motion Control Tool MCT 10.
Table 14: 600-** PROFIsafe
Parameter Options/valid
range
Default
value
Description Conversion
index
Data type
600-44 Fault Message
Counter
0–65535 0 Shows the number of error messages
shown since the last reset.
– u_int16
600-52 Fault Situation
Counter
0–1000 0 Shows the number of error situations
shown since the last reset.
– u_int16
Parameter Setup
Installation Guide | VLT®Safety Option MCB 152
AN327351953089en-000101 / 130R0578
52 | Danfoss A/S © 2020.02

Danfoss VLT AutomationDrive FC 300 Series Specifications

General

Brand	Danfoss
Model	VLT AutomationDrive FC 300 Series
Category	DC Drives
Language	English