Danfoss VLT FC 100 Series Programming Guide

3.12. Main Menu - LonWorks - Group 11
3.12.1. LonWorks, 11*
Parameter group for all LonWorks specific parameters.
Parameters related to LonWorks ID.
11-00 Neuron ID
Option: Function:
View the Neuron chip's unique Neuron ID number.
11-10 Drive Profile
Option: Function:
This parameter allows selecting between LONMARK Functional Profiles.
[0]
*
VSD Profile The Danfoss Profile and the Node Object are common for all profiles.
11-15 LON Warning Word
Range: Function:
0 * [0 - FFFF ]
This parameter contains the LON specific warnings.
Bit Status
0 Internal fault
1 Internal fault
2 Internal fault
3 Internal fault
4 Internal fault
5 Invalid type change for nvoAnIn1
6 Invalid type change for nvoAnIn2
7 Invalid type change for nvo109AnIn1
8 Invalid type change for nvo109AnIn2
9 Invalid type change for nvo109AnIn3
10 Initialization error
11 Internal communication error
12 Software revision mismatch
13 Bus not active
14 Option not present
15 LON input (nvi/nci) exceeds limits
11-17 XIF Revision
Option: Function:
This parameter contains the version of the external interface file on the Neuron C chip on the LON option.
0 * [0 - 0]
Read only.
11-18 LonWorks Revision
Option: Function:
This parameter contains the software version of the application program on the Neuron C chip on the LON option.
0 * [0 - 0 ]
Read only.
VLT
®
HVAC Drive Programming Guide 3. Parameter Description
MG.11.C5.02 - VLT
®
is a registered Danfoss trademark 113
3

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English