Danfoss VLT FC 100 Series User Manual

- Store all set-ups: All parameter values will be stored in the non-
volatile memory. The value returns to
Off when all parameter
values have been stored.
10-33 Store Always
Option: Function:
[0]
*
Off
[1] On This parameter is used to select whether parameter data re-
ceived via the DeviceNet option should always be stored in non-
volatile memory.
16-90 Alarm Word
Range: Function:
0
*
[0 - FFFFFFFF] View the alarm word sent via the serial communication port in
hex code.
16-92 Warning Word
Range: Function:
0
*
[0 - FFFFFFFF] View the warning word sent via the serial communication port
in hex code.
FC 100/ 200/ 300 DeviceNet 6. Parameters
MG.33.D3.02 - VLT
®
is a registered Danfoss trademark 65
6

Danfoss VLT FC 100 Series Specifications

General

Brand	Danfoss
Model	VLT FC 100 Series
Category	DC Drives
Language	English