Danfoss VLT Micro User Manual

1.3.3 Mechanical Dimensions
A template for drilling can be found on the flap of the
packaging.
B
a A
a A
a A
a A
a A
C
C
C C C
b
B
b
B
b
B
b
B
b
Ø 7mm
M5
M4
M3
M2
M1
Ø 7mm Ø 5.5mm Ø 4.5mm
130BB321.11
Ø 4.5mm
Illustration 1.1 Mechanical Dimensions.
Power (kW)
Height (mm) Width (mm)
Depth
1)
(mm)
Max. Weight
Frame 1 X 200-240V 3 X 200 -240V 3 X 380-480V A
A (incl. decoupling
plate)
a B b C Kg
M1 0.18 - 0.75 0.25 - 0.75 0.37 - 0.75 150 205 140.4 70 55 148 1.1
M2 1.5 1.5 1.5 - 2.2 176 230 166.4 75 59 168 1.6
M3 2.2 2.2 -3.7 3.0 - 7.5 239 294 226 90 69 194 3.0
M4 11.0-15.0 292 347.5 272.4 125 97 241 6.0
M5 18.5-22.0 335 387.5 315 165 140 248 9.5
1)
For LCP with potentiometer, please add 7.6mm.
Table 1.1 Mechanical Dimensions
1.3.4
Electrical Installation in General
NOTE
All cabling must comply with national and local regulations on cable cross-sections and ambient temperature. Copper
conductors required, (60-75° C) recommended.
Power (kW) Torque (Nm)
Frame 1 x 200-240V 3 x 200-240V 3 x 380-480V Line Motor DC connection/Brake Control Terminals Earth Relay
M1 0.18 - 0.75 0.25 - 0.75 0.37 - 0.75 1.4 0.7
Spade
1)
0.15 3 0.5
M2 1.5 1.5 1.5 - 2.2 1.4 0.7
Spade
1)
0.15 3 0.5
M3 2.2 2.2 - 3.7 3.0 - 7.5 1.4 0.7
Spade
1)
0.15 3 0.5
M4 11.0-15.0 1.3 1.3 1.3 0.15 3 0.5
M5 18.5-22.0 1.3 1.3 1.3 0.15 3 0.5
1)
Spade connectors (6.3mm Faston plugs)
Table 1.2 Tightening of Terminals
Quick Guide VLT Micro Drive Quick Guide
MG.02.B6.02 - VLT
®
is a registered Danfoss trademark 3
1 1

Danfoss VLT Micro Specifications

General

Brand	Danfoss
Model	VLT Micro
Category	Media Converter
Language	English