Dansons Group PB1100PSC2 User Manual

ENGLISH
16
20.    
Parts Required:
1 x Side Burner (#17)
Installation:
• Remove the two pre-installed screws from the underside of the Side
Burner Shelf. From above, carefully insert the the Side Burner into the
Side Burner Shelf, then secure using the two screws previously removed.
• Next, insert the end of the Side Burner onto the side burner valve,
completing the connection of the Side Burner to the Burner Knob.
21.     
Parts Required:
1 x Side Burner Grate (#19)
Installation:
• Open the lid of the Side Burner Shelf. Place the Side Burner Grate into
the Side Burner Shelf.
22.    
Installation:
• Locate the igniter wire from behind the gas control panel (front panel
with three knobs).
• Without disonnection from the gas control panel, plug the igniter wire
into the end of the electrode of the Side Burner. Check to ensure the
electrode is firmly connected.
23
21
22
19
20
17
23.    
Installation:
• Mount the fixed hose retainer from the gas hose onto the back of the
Side Burner Panel with the pre-installed screw.

Dansons Group PB1100PSC2 Specifications

General

Brand	Dansons Group
Model	PB1100PSC2
Category	Grill
Language	English