Datalogic PowerScan BC9600-433 User Manual

Portable Desktop Mounting
QUICK REFERENCE GUIDE 9
4. Unlock the lever and remove the connection module from the base sta-
tion.
5. Screw the connection module and mounting plate sub-assembly to a flat
surface using four screws as shown in the figure below.
6. With the lever still unlocked, align the base station with the connection
module until you see the sphere inside the bigger hole on the right.
Screws Position Screws Position

Datalogic PowerScan BC9600-433 Specifications

General

Brand	Datalogic
Model	PowerScan BC9600-433
Category	Accessories
Language	English