base station Models
2
BC96XX BASE STATIONS
BASE STATION MODELS
Each base station is composed of a cradle which must be connected to a con-
nection box, depending on the interface desired and on the IP (water and
dust) protection grade.
The base station and connection box models are listed below.
Base Station Models
BC9600-433 BASE/CHARGER 433MHZ w/o conn. box
BC9600-910 BASE/CHARGER 910MHZ w/o conn. box
BC9630-433 BASE/CHARGER 433MHZ M-INT
BC9630-910 BASE/CHARGER 910MHZ M-INT
BC9631-433 BASE/CHARGER 433MHZ M-INT IP65
BC9631-910 BASE/CHARGER 910MHZ M-INT IP65
BC9680-433 BASE/CHARGER 433MHZ ETH
BC9680-910 BASE/CHARGER 910MHZ ETH
Connection Box Models
CM9630 CONN MOD M-INT
CM9631 CONN MOD M-INT IP65
CM9680 CONN MOD ETH
INSTALLATION
To set up your BC96XX base station you must:
1. Physically install it.
2. Make all system connections.
3. Configure it.
PACKAGE CONTENTS
The base station package contains the following items:
• BC96XX Base Station (with Desktop Positioning Tab installed)
• BC96XX Quick Reference Guide (this manual)
• 1 Mounting plate
• 1 Wall Mounting Bracket
To Next Page
Loading...
Need help?
General
