To Next Page

To Previous Page

Using the PowerScan™ PD953X

4 PowerScan™ PD953X

Using the PowerScan™ PD953X

The PowerScan™ PD953X normally functions by capturing

and decoding bar codes. The reader is equipped with an

internal Motionix™ motion-sensing function which acti-

vates the aiming system on device motion. The intelligent

aiming system indicates the field of view which should be

positioned over the bar code:

Table 1. Aiming System

The field of view indicated by the aiming system will be

smaller when the reader is closer to the bar code and

larger when it is farther from the code. Symbologies with

smaller bars or elements (mil size) should be read closer

to the unit. Symbologies with larger bars or elements (mil

size) should be read farther from the unit.

If the entire bar code is within the aiming field, you will get

a good read. Successful reading is signaled by an audible

tone plus a good-read green spot LED indicator.

Reference the PowerScan™ 9500 Family Product Refer-

ence Guide (PRG) for more information about this feature

and other programmable settings.

Model P/N Aimer pattern

PD953X /

PD953X-DPM

PD953X-HP /

PD953X-HPE

Datalogic PowerScan PBT950X Quick Reference Guide

Other manuals for Datalogic PowerScan PBT950X