Caps Lock State
Quick Reference Guide 23
Caps Lock State
This option specifies the format in which the reader sends
character data.
When using the Base Interface, this applies only to keyboard
wedge interfaces. It does not apply when an alternate key
encoding keyboard is selected.
The following bar codes can be used either
while in HID mode (when reader is connected
using Bluetooth) or for configuring the base.
CAPS LOCK STATE
ENTER/EXIT PROGRAMMING MODE
Caps Lock State = Caps Lock OFF
Caps Lock State = Caps Lock ON
Caps Lock State = AUTO Caps Lock Enable
To Next Page
Loading...
Need help?
General
