Datamax Microflash 2Te User Manual

MICROFLASH 2Te PRINTER USER'S GUIDE
13
Using Printer Data Cables
1. Select the appropriate cable for use with the host/
device you are using.
2. Insert the plug into the printer data port (Figure 12).
3. Lead the cable through the notch on the outside of
the printer cover.
4. With the cable exiting the front of the printer, close
and latch the printer cover.
Note: When closing the printer, be cautious of the
cable that is exiting to prevent pinching of the cable.
Remove the cable when the printer is not in use.
Figure 21
Figure 22

Datamax Microflash 2Te Specifications

General

Brand	Datamax
Model	Microflash 2Te
Category	Printer
Language	English