A26618-A
ENG
150 mm kit
This accessory makes it possible to
use a 150 mm media roll instead of a
standard 100 mm roll.
Mounting
- Unscrew the existing spindle.
- Install your 150 mm kit.
- Screw on the new spindle.
Peel-Off kit
The Peel-Off accessory separates
lables from their carrier paper.
The carrier paper is rolled up under
the printer.
This will only work with 100 mm
rolls.
• This accessory may only be
installed at the factory or by a
qualified service technician.
Accessories
12 - ENGLISH
To Next Page
Loading...
Need help?
General