Daymak Boomerbuggy X Pro User Manual

32
Technical Data
This secon provides you with the technical specicaons for your Mobility Scooter.
The Motor and Wheel Assembly
The Boomerbuggy X Pro has a magnec DC brushless motor on the rear wheel hub. This
type of motor has excellent low-end torque and high eciency when working within its
range. Note that while the motor is very quiet, it does produce some noise.
The Controller
Daymak pioneered the development of intelligent component control in Mobility Scooters.
The Daymak Drive technology developed by Daymak is the brain of your Mobility Scooter.
It allows your Mobility Scooter to achieve faster acceleraon, to climb steeper hills, and
to save energy.
The electronic controller is located under the seat assembly. This controller eciently
regulates the speed and electronic funcons of the bicycle. It allows for stepless speed
adjustment, shuts o the motor when the brakes are acvated, has low voltage protecon
and has fuses to prevent excess current from damaging the Mobility Scooter’s systems.
The Brakes
Front Brakes
The brakes on your mobility scooter are hydraulic disc-brakes, like those found on gas
scooters and motorcycles. They generally provide for very ne stopping and control.
This is a very tested and well-designed technology, but even so, the brakes will require
servicing from me to me, and may have to be adjusted for tension.
The brakes are contained within a sealed unit, and are very nely adjusted and ed.
Rear Brakes
The rear brakes on your mobility scooter are hydraulic brakes. These provide a good
fricon-grip when they are acvated.

Daymak Boomerbuggy X Pro Specifications

General

Brand	Daymak
Model	Boomerbuggy X Pro
Category	Scooter
Language	English