10
Lights
The headlight and tail light are useful features when you are riding at night or in dark areas.
They radically improve your safety in mixed trac. The lights on your e-bike consume
some electricity. Keeping them on may reduce the maximum distance you can travel on
one charge by about 5 %.
Pedaling
This e-bike is designed to be a motor-assisted bicycle. You can use the motor by itself,
but ideally, you can work with the motor by pedaling. This increases the distance you can
travel on your e-bike, because it assists the motor and reduces the amount of electricity
you draw from the baery.
Riding in Wet Weather
Your e-bike is designed to funcon in wet condions, such as when it is raining. However,
because the motor is on the rear wheel, it is easy to slip when moving at high speeds. If
it is very wet, be sure to avoid high speeds. When you are traveling in wet weather, water
may cause your brakes to funcon less eecvely because it reduces fricon between the
brake pads and the wheels. Take care to slow down and give yourself more room to stop
or slow if necessary.
The Motor and Water
Your e-bike is not designed to be immersed in water. Always ensure that the water level
does not go above the middle of the re, to prevent water from geng inside the motor.
Water in the motor can cause short-circuits and may damage the electrical systems in
your e-bike.
To Next Page
Loading...
Need help?
General