Daymak MAX User Manual

14
Understanding your voltage
Electric scooters primary power is displayed on your unit as a voltage. This number in
short shows how powerful your unit is, and as it dips down when the unit will no longer
be able to perform. Depending on your unit’s voltage and baery type (Lithium vs Lead
Acid) will eect the range of voltage between what is fully charged and when it exceeds
the low voltage threshold.
Low Voltage Threshold
Your unit will try to protect the baery by prevenng the motor from drawing power below
the Low Voltage Threshold. By doing this it will signicantly increase the life expectancy of
your unit. If you nd that your motor starts cung o at a certain speed or not engaging
at all it may be because your voltage is dropping past the threshold point and needs to be
charged. To see what your voltage threshold you can check on it via the bluetooth APP (if
applicable) and you can check it out using this chart.
Voltage Chart
LITHIUM Full/Low Voltage Reading
Depending on the way your lithium baery’s was made will impact what the low voltage
and full charge reading should be. Underneath each reading on the above chart shows
a number and an “S” this represents how many series are in your baery pack. To know
the exact series of your baery contact your local Daymak dealer.
Lead Acid Lithium ion
Full charge Low Voltage Full charge Low Voltage
48V 53V 42V
60V 67V 53V
24V 27V 21V
36V 40V 32V
54.6V / 58.8V 37V / 40V
67.2 / 71.4V 45V / 48V
29.4V 20V
42V 28V
7 S 7S
16 S 17 S 16 S 21 S
20 S 21 S 20 S 21 S
Voltage
10S 10 S

Daymak MAX Specifications

General

Brand	Daymak
Model	MAX
Category	Scooter
Language	English