Daymak MAX User Manual

24
The Brakes
The brakes on your e-bike are disc brakes. They generally provide for very ne stopping
and control. This is a highly tested and well-designed technology, but even so, the brakes
will require servicing from me to me, and may have to be adjusted for tension.
When the brakes are acvated, tension increases and the clamps engage. This is a very
eecve and reliable way to stop a vehicle.
The Chain and Pedals
The pedals are connected to the rear wheel. Along with the chain, they provide a human-
powered “drive train”. This is an important part of your e-bike. The pedals are not
removable and should not be removed.
VeHICLE IDENTIFICATION NUMBER
(VIN)
Your unit comes with a Vehicle Idenaon
Number. You should write this down and
keep it somewhere safe in case of the of
your unit. This is also required for registering
your warranty on the warranty secon of
Daymak.com. To nd the VIN on your Tono
X 36V look on neck of the bike just above
where the forks are and below the Daymak
symbol.

Daymak MAX Specifications

General

Category	Electric Scooter
Motor Power	500W
Battery Type	Lithium-Ion
Battery Voltage	48V
Battery Capacity	12Ah
Max Speed	32 km/h
Weight Capacity	120 kg
Brakes	Disc Brakes
Tire Size	10 inches
Charging Time	4-6 hours
Range	40 km
Weight	23 kg