Printed pages are blank.
The toner cartridge is empty or defective.
Replace the toner cartridge.
Printed pages are solid black.
The toner cartridge is defective.
Your printer requires servicing.
Try the following:
Replace the toner cartridge.
Call for service.
Paper curls badly once it prints and exits to the bin.
The Paper Texture
1
setting is wrong for the type of paper or specialty media you are using.
Change the Paper Texture
1
from Rough to Normal or Smooth.
1
This setting can be changed using the Local Printer Settings Utility.
2
Call a service technician to replace the fuser.
Error Recovery
Load <input source> <type> <size>
Load the specified paper input tray with the designated paper type and size.
Load Manual <type> <size>
Load the manual feeder with the designated paper type and size.
Output Bin Full — Remove Paper
Remove any paper from the output bin, and then press the Continue button .
Insert Duplex Pages in Tray 1, Then Press Continue
1. Remove the printed pages from the output bin.
2. Remove Tray 1.
3. Load the tray with the already printed side facing up, and the top of the page toward the front of the tray.
NOTE: This message only appears if you are using a printer without an automatic duplex unit.
To Next Page
Loading...
Need help?
General