Setting Up Your Monitor: Dell 1908WFP Flat Panel Monitor User's Guide
file:///T|/htdocs/monitors/1908WFP/en/ug/operate.htm[10/31/2012 11:34:21 AM]
Back to Contents Page
Operating the Monitor
Dell™ 1908WFP Flat Panel Monitor User's Guide
Using the Front Panel Controls
Using the On-Screen Display (OSD) Menu
Setting the Optimal Resolution
Using the Dell Soundbar (Optional)
Using the Tilt, Swivel, and Vertical Extension
Rotating the monitor
Adjusting the Rotation Display Settings of Your System
Using the Front Panel
Use the buttons on the front of the monitor to adjust the image settings.
Front panel Button Description
A
Input select
Use the Input Select button to select between two different video signals that may be connected to your monitor.
VGA input
DVI-D input
NOTE: The floating 'Dell Self-test Feature Check' dialog appears on a black background if the monitor
cannot sense a video signal. Depending upon the selected input, one of the dialogs shown below will scroll
continually.
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.
B
OSD menu/select
Use the Menu button to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See Using the OSD Menu
.
C
Brightness/Contrast
Use this button for direct access to the "Brightness" and "Contrast" control menu.
To Next Page
Loading...
Need help?
General