About Your Monitor: Dell 1908WFP For Dell Flat Panel Monitor User'sGuide
file:///T|/htdocs/monitors/1908WFP/en/ug/about.htm[10/31/2012 11:33:23 AM]
2. OSD menu/select button
3. Brightness & Contrast/Down (-) button
4. Auto-adjust/Up (+) button
5. Power button (with power light indicator)
Back View
Back View Back View with monitor stand
Label Description/Use
1 VESA mounting holes (100mm) (Behind
attached base plate)
Use to mount the monitor.
2 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
3 Security lock slot Use a security lock with the slot to help secure your monitor.
4 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.
5 Regulatory rating label Lists the regulatory approvals.
6 Stand removal button Press to release the stand.
7 Cable holder Helps organize cables by placing them in the holder.
8 Lock down/release button Push the monitor down, press the button to unlock the monitor, and then
lift the monitor to the desired height.
Bottom View
Bottom View Bottom View with monitor stand
Label Description
1 Power
connector
Insert the power cable.
To Next Page
Loading...
Need help?
General