To Next Page

To Previous Page



OSD Warning Messages



Back

Mode

When PIP/PBP activated

PIP/PBP Source

PIP Position

PIP Size

PIP/PBP Contrast

PIP/PBP Hue/Tint

PIP/PBP Saturation

Exit Menu

PIP/PBP submenu when PIP/PBP ON (main source is VGA/DVI-D

input)

PIP/PBP submenu when PIP/PBP ON

(main source is Video input)

 OR

Push  to go back to the main menu.

There are two modes: PIP (Picture in Picture) and PBP (Picture By Picture)

Use and tobrowseand to select "Off", "PIP" or "PBP".

When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.

Select an input signal for PIP/PBP. (VGA/DVI/S-Video/Composite/Component)

Use and tobrowseand to select.

Select PIP window position.

Use and tobrowseand to select.

Select PIP window size.

Use and tobrowseand to select.

Adjust the contrast level of the picture in PIP/PBP Mode.

reduce the contrast

increas the contrast

This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.

shifts image color towards green

shifts image color towards purple

Adjust the color saturation of PIP/PBP image.

makes the image look more monochrome

makes the image look more colorful

Push to exit the OSD main menu.

When the monitor does not support a particular resolution mode you will see the following message :



Dell 2707WFP User Manual

Other manuals for Dell 2707WFP