Dell 3115cn Color Laser Printer - PS Settings

To change printer settings that only affect jobs using the PCL emulation printer language.
Values:
Paper Tray
Specifies the input tray.
Paper Size
Specifies the default paper size.
Custom Size - Y
Specifies the length of paper. The available range is from 98 mm (3.89 in.) to 355 mm
(13.98 in.).
Custom Size - X
Specifies the width of paper. The available range is from 77 mm (3.03 in.) to 220 mm
(8.66 in.).
Orientation
Specifies how text and graphics are oriented on the page.
2 Sided
Sets duplexing as the default for all print jobs. This item is only available when the
optional duplexer is installed.
Font
Specifies the default font from the registered fonts in the multifunction printer.
Symbol Set
Specifies a symbol set for a specified font.
Font Size
Specifies the font size for scalable typographic fonts.
Font Pitch
Specifies the font pitch for scalable monospaced fonts.
Form Line
Specifies the number of characters in a line.
Quantity
Sets the number of copies you want for the printer default value.
Image
Enhancement
Specifies whether to perform the image enhancement feature.
Hex Dump
Specifies whether to help isolate the source of a print job problem. With Hex Dump
selected, all data sent to the multifunction printer is printed in hexadecimal and
character representation. Control codes are not executed.
Draft Mode
Specifies whether to print in the draft mode.
Line
Termination
Sets the line termination.
Default Color
Specifies the color mode to Color or Black . This setting is used when the color
printing mode setting is not specified for the print job that is sent to the multifunction
printer.
PS Settings
Purpose:
To change printer settings that only affect jobs using the PostScript emulation printer language.
Values: