EasyManuals Logo
Home>Dell>Switch>EMC PowerSwitch Z9432F-ON

Dell EMC PowerSwitch Z9432F-ON User Manual

Dell EMC PowerSwitch Z9432F-ON
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
The Z9432F-ON switch
The following sections describe the Dell EMC Z9432F-ON switch.
Topics:
Introduction
Features
Physical dimensions
LED display
Prerequisites
Z9432F-ON switch configurations
Luggage tag
Introduction
The Z9432F-ON switch is a 1U, full-featured fixed 10/25/40/50/100/200/400 GbE data center switch with 400 GbE optical
interfaces for data center leaf aggregation. The Z9432F-ON supports 32 quad small form-factor pluggable 56-DD (QSFP56-DD)
400 GbE ports and two small form-factor pluggable plus (SFP+) ports. This switch is also usable as 25/50/100 GbE switch
using 25/50/100 GbE breakout for connections to switches, servers, and storage.
CAUTION:
Switches with fan airflow from the PSU to the I/Oreverse airfloware subject to tighter
restrictions for power consumption on cables and optics that are used for 400 GbE ports. Reverse airflow
switches do not support high-power cables or optics. 400 GbE transceivers and active cables may exceed the
supported threshold. For more information, see the
Dell EMC PowerSwitch with High-Power Optics
guide.
CAUTION: Review the optics specification sheet and the switch data sheet to understand which models support
airflow from the I/O to the PSU (normal) and which support airflow from the PSU to I/O (reverse).
The Z9432F-ON switch has seven fans and two AC or DC PSUs. The switch also has one RJ45 serial console port, one
Micro-USB type-B console port, one 10/100/1000 Base-T Ethernet management port, and one USB type-A port for the external
storage. Management ports are on the I/O-side of the switch.
NOTE:
Redundant AC power requires high-line 200 VAC to 240 VAC. Using low-line 120 VAC does not provide redundancy
for the switch.
The Z9432F-ON switch supports the following optic configurations:
32 x 400 GbEQSFP56-DD
64 x 200 GbEQSFP56
128 x 100 GbEQSFP56-DD & 4xQSFP28
128 x 100 GbEQSFP56-DD & 4xSFP-DD
128 x 40 GbEQSFP56-DD & 4xQSFP+
128 x 25 GbE
128 x 10 GbE
The Z9432F-ON switch I/O-side view:
2
The Z9432F-ON switch 7

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell EMC PowerSwitch Z9432F-ON and is the answer not in the manual?

Dell EMC PowerSwitch Z9432F-ON Specifications

General IconGeneral
BrandDell
ModelEMC PowerSwitch Z9432F-ON
CategorySwitch
LanguageEnglish

Related product manuals