Next steps
1. Install the battery.
2. Install the base cover.
3. Follow the procedure in After working inside your computer.
Solid-state drives
Removing the solid-state drive in SSD slot one
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
NOTE: Depending on the configuration ordered, your computer may support either 2230 solid-state drive or 2280 solid-
state drive in SSD slot one.
The following image indicates the location of the solid-state drive that is installed in SSD slot one and provides a visual
representation of the removal procedure.
Removing and installing components
19
To Next Page
Loading...
Need help?
General
