10. Remove the camera.
11. Remove the display cable.
About this task
After performing the preceding steps, you are left with the display back cover.
Next steps
1. Replace the display cable.
2. Replace the camera.
3. Replace the display panel.
4. Replace the display hinges.
5. Replace the hinge caps.
6. Replace the display bezel.
7. Replace the display assembly.
8. Replace the battery.
9. Replace the base cover.
10. Replace the microSD card.
11. Follow the procedure in after working inside your computer.
Palmrest assembly
Replacing the palmrest and keyboard assembly
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the microSD card.
Disassembly and reassembly
113