Dell J1FD8 User Manual

Option Description
Enable VT for Direct I/O - enabled by default.
Trusted
Execution
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional
hardware capabilities provided by Intel Trusted Execution Technology. The TPM Virtualization
Technology, and the Virtualization technology for direct I/O must be enabled to use this feature.
Trusted Execution - disabled by default.
Wireless
Option
Description
Wireless Device
Enable
Allows you to enable or disable the internal wireless devices.
● WLAN
● Bluetooth
All the options are enabled by default.
Maintenance screen
Option
Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default.
BIOS Downgrade This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is
enabled by default.
Data Wipe This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next
boot' is not enabled by default. The following is list of devices affected:
● Internal SATA HDD/SSD
● Internal M.2 SATA SDD
● Internal M.2 PCIe SSD
● Internal eMMC
BIOS Recovery This field allows you to recover from certain corrupted BIOS conditions from a recover file on the user
primary hard drive or an external USB key.
● BIOS Recovery from Hard Drive—enabled by default
● Always perform integrity check—disabled by default
First Power On
Date
This option lets you set Ownership date.
● Set Ownership Date—disabled by default
System logs
Option
Description
BIOS Events Allows you to view and clear the System Setup (BIOS) POST events.
Thermal Events Allows you to view and clear the System Setup (Thermal) events.
Power Events Allows you to view and clear the System Setup (Power) events.
System setup 125

Dell J1FD8 Specifications

General

Brand	Dell
Model	J1FD8
Category	Laptop
Language	English