Option Description
• Enable Thunderbolt (and PCIe behind TBT) Pre-boot
Modules
• No Security
• User Authorization—This option is enabled by default.
• Secure Connect
• Display Port and USB Only
Thunderbolt Auto Switch Allows you to configure the method used by the Thunderbolt controller
to perform the PCIe device enumeration. By default, the Auto switch
option is enabled.
The options are:
• Native Enumeration
• BIOS Assist Enumeration
Audio
Allows you to enable or disable the integrated audio controller. By
default, the Enable Audio option is selected.
The options are:
• Enable Microphone
• Enable Internal Speaker
By default, all the options are enabled.
Fingerprint Reader Enables or disables the fingerprint reader device. The options are:
• Enable Fingerprint Reader Device
• Enable Finger Reader Single Sign On
By default, both the options are enabled.
Miscellaneous devices
Allows you to enable or disable the following devices:
• Enable Camera
• Enable Hard Drive Free Fall Protection
• WiFi Radio
• Enable Secure Digital (SD) Card
By default, all the options are enabled.
Video screen options
Table 22. Video
Option Description
LCD Brightness
Allows you to set the display brightness depending upon the power
source. By default, Brightness On Battery is 50% and Brightness
On AC is 100%.
Security
Table 23. Security
Option Description
Admin Password
Allows you to set, change, or delete the administrator (admin) password.
The entries to set password are:
• Enter the old password:
System setup 21