EasyManuals Logo
Home>Dell>Desktop>OptiPlex 390

Dell OptiPlex 390 User Manual

Dell OptiPlex 390
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
To avoid damaging your computer, perform the following steps before you begin
working inside the computer.
1. Ensure that your work surface is flat and clean to prevent the computer
cover from being scratched.
2. Turn off your computer (see Turning Off Your Computer).
CAUTION: To disconnect a network cable, first unplug the cable from your
computer and then unplug the cable from the network device.
3. Disconnect all network cables from the computer.
4. Disconnect your computer and all attached devices from their electrical
outlets.
5. Press and hold the power button while the computer is unplugged to
ground the system board.
6. Remove the cover.
CAUTION: Before touching anything inside your computer, ground yourself by
touching an unpainted metal surface, such as the metal at the back of the
computer. While you work, periodically touch an unpainted metal surface to
dissipate static electricity, which could harm internal components.
Recommended Tools
The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips screwdriver
Small plastic scribe
Flash BIOS update program media
Turning Off Your Computer
CAUTION: To avoid losing data, save and close all open files and exit all open
programs before you turn off your computer.
1. Shut down the operating system:
In Windows 7:
Click Start , then click Shut Down.
In Windows Vista:
8

Table of Contents

Other manuals for Dell OptiPlex 390

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell OptiPlex 390 and is the answer not in the manual?

Dell OptiPlex 390 Specifications

General IconGeneral
Tcase72.6 °C
Bus typeDMI
Processor cache6 MB
Processor cores4
Processor modeli5-2400
System bus rate5 GT/s
Processor familyIntel® Core™ i5
Processor seriesIntel Core i5-2400 Desktop Series
Processor socketLGA 1155 (Socket H2)
Processor codenameSandy Bridge
Processor frequency3.1 GHz
Processor cache typeSmart Cache
Processor lithography32 nm
Processor manufacturerIntel
Processor front side bus- MHz
PCI Express slots version2.0
Processor boost frequency3.4 GHz
Processor operating modes64-bit
ECC supported by processorNo
Thermal Design Power (TDP)95 W
Number of processors installed1
CPU multiplier (bus/core ratio)31
Maximum number of PCI Express lanes16
Memory types supported by processorDDR3-SDRAM
Memory clock speeds supported by processor1066, 1333 MHz
Memory bandwidth supported by processor (max)21 GB/s
Maximum internal memory supported by processor32 GB
Product typePC
Motherboard chipsetIntel® H61
Internal memory4 GB
Memory channelsDual-channel
Memory clock speed1333 MHz
Memory layout (slots x size)1 x 4 GB
HDD speed7200 RPM
HDD interfaceSATA III
Optical drive typeDVD-RW
Card reader integrated-
Total storage capacity500 GB
On-board graphics cardYes
On-board graphics card ID0x102
Discrete graphics card modelNot available
On-board graphics card modelIntel® HD Graphics 2000
On-board graphics card familyIntel® HD Graphics
On-board graphics card base frequency850 MHz
On-board graphics card dynamic frequency (max)1100 MHz
Number of displays supported (on-board graphics)2
Operating system installedWindows 7 Professional
USB 2.0 ports quantity10
Firewire (IEEE 1394) ports0
Chassis typeSFF
Product colorBlack
Sustainability certificatesRoHS, ENERGY STAR
Power supply240 W
Processor ARK ID52207
Processor package size37.5 x 37.5 mm
Supported instruction setsAVX
Intel Identity Protection Technology version1.00
Weight and Dimensions IconWeight and Dimensions
Depth312 mm
Width93 mm
Height290 mm
Weight5700 g

Related product manuals