Non-operating 12,192m (40,000 ft) (maximum)
Thermal dissipation • 102.3 BTU/hour (maximum)
• 62.8 BTU/hour (typical)
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the
monitor can automatically reduce its power consumption when not in use. This is
referred to as Power Save Mode*. If the computer detects input from the keyboard,
mouse, or other input devices, the monitor automatically resumes functioning. The
following table shows the power consumption and signaling of this automatic power
saving feature.
VESA Horizontal Vertical Video Power Power Consumption
Modes Sync Sync Indicator
Normal
operation
Active Active Active White P2214H P2414H
42 W (maximum)** 45 W (maximum)**
26 W (typical) 28 W (typical)
Active-off
mode
Inactive Inactive Blanked White
(Breathing)
Less than 0.3 W Less than 0.3 W
Switch
off
- - - Off Less than 0.3 W Less than 0.3 W
The OSD functions only in the normal operation mode. When any button is pressed in
the Active-off mode, one of the following messages will be displayed:
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR
®
-compliant.
14 | About Your Monitor
To Next Page
Loading...
Need help?
General
