Name: Dell P78F
Brand: Dell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

System setup

NOTE: Depending on the computer and its installed devices, the items listed in this section may or may not be displayed.

System setup

CAUTION: Unless you are an expert computer user, do not change the settings in the BIOS Setup program. Certain changes can

make your computer work incorrectly.

NOTE: Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen

information for future reference.

Use the BIOS Setup program for the following purposes:

• Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.

• Change the system conguration information.

• Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base devices.

Entering BIOS setup program

1 Turn on (or restart) your computer.

2 During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately.

NOTE

: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch

for it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and the

operating system logo appears, continue to wait until you see the desktop. Then, turn o your computer and try again.

Navigation keys

NOTE

: For most of the System Setup options, changes that you make are recorded but do not take eect until you restart the

system.

Keys Navigation

Up arrow Moves to the previous eld.

Down arrow Moves to the next eld.

Enter Selects a value in the selected eld (if applicable) or follow the link in the eld.

Spacebar Expands or collapses a drop-down list, if applicable.

Tab Moves to the next focus area.

NOTE: For the standard graphics browser only.

Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message

that prompts you to save any unsaved changes and restarts the system.

Boot Sequence

Boot Sequence allows you to bypass the System Setup–dened boot device order and boot directly to a specic device (for example:

optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can:

System setup 67

Dell P78F User Manual

Other manuals for Dell P78F