Dell PowerConnect 2708 User Manual

40
Starting the Application
1 Open a Web browser.
2 Enter the Ethernet Switch IP address (the default IP address is: 192.168.2.1) in the address
bar and press
<Enter> .
For information about assigning an IP address to the Ethernet Switch, see "
Viewing System
IP Address
."
3 When the Enter Network Password window opens, enter a user name and password.
NOTE: The Ethernet switch is configured with a default IP address, user login and password. Activating
the Managed Mode button recovers the factory default setting (no password). For information about
recovering a lost password, see "Managed Mode Button".
NOTE: Passwords are both case-sensitive and alphanumeric.
4 Click OK .
The
Dell PowerConnect OpenManage Switch Administrator home page opens.
Table 5-3. PowerConnect Switch Management Buttons
Button Description
Apply Changes Applies changes to the Ethernet Switch.
Refresh Refreshes Ethernet Switch information.
Print Prints the Network Management System page or table
information.

Dell PowerConnect 2708 Specifications

General

Brand	Dell
Model	PowerConnect 2708
Category	Switch
Language	English