EasyManuals Logo

Dell PowerConnect 2708 User Manual

Dell PowerConnect 2708
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
76
Received Bytes (Octets)
— Number of octets received on the interface since the system was last
reset. This number includes bad packets and FCS octets, but excludes framing bits.
Received Packets
— Number of packets received on the interface, including bad packets, Multicast
and Broadcast packets, since the system was last reset.
Broadcast Packets Received
— Number of good Broadcast packets received on the interface since
the system was last reset. This number does not include Multicast packets.
Multicast Packets Received
— Number of good Multicast packets received on the interface since
the system was last reset.
CRC & Align Errors
— Number of CRC and Align errors that have occurred on the interface since
the system was last reset.
Undersize Packets
— Number of undersized packets (less than 64 octets) received on the interface
since the system was last reset.
Oversize Packets
— Number of oversized packets (over 1518 octets) received on the interface since
the system was last reset.
Fragments
— Number of fragments (packets with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the system was last reset.
Jabbers
— The total number of packets received that were longer than 1518 octets (excluding
framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with
an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error). The allowed range to detect jabber is between 20 ms and 150 ms.
Collisions
— Number of collisions received on the interface since the system was last reset.
Frames of
xx
Bytes
— Number of
xx
-byte frames received on the interface since the system was last
reset.
Viewing Interface Statistics
1
Open the
RMON Statistics
page.
2
Select an interface type and number in the
Interface
field.
The interface statistics are displayed.

Table of Contents

Other manuals for Dell PowerConnect 2708

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 2708 and is the answer not in the manual?

Dell PowerConnect 2708 Specifications

General IconGeneral
BrandDell
ModelPowerConnect 2708
CategorySwitch
LanguageEnglish

Related product manuals