Dell PowerEdge R410 User Manual

60 Using the System Setup Program and UEFI Boot Manager
Processor Settings Displays information related to microprocessors (speed, cache
size, and so on). See "Processor Settings Screen" on page 61.
SATA Settings See "SATA Settings Screen" on page 62.
Boot Settings See "Boot Settings Screen" on page 63.
Integrated Devices See "Integrated Devices Screen" on page 64.
PCI IRQ
Assignment
Displays a screen to change the IRQ assigned to each of the
integrated devices on the PCI bus, and any installed expansion
card that requires an IRQ.
Serial
Communication
(Off default)
See "Serial Communication Screen" on page 65.
Embedded Server
Management
See "Embedded Server Management Screen (Optional)" on
page 66.
Power
Management
See "Power Management Screen" on page 66.
System Security Displays a screen to configure the system password and setup
password features. See "System Security Screen" on page 67,
"Using the System Password" on page 71, and "Using the Setup
Password" on page 74 for more information.
Keyboard
NumLock
(
On default)
Determines whether your system starts up with the NumLock
mode activated on 101- or 102-key keyboards (does not apply to
84-key keyboards).
Report Keyboard
Errors
(
Report default)
Enables or disables reporting of keyboard errors during the
POST. Select Report for host systems that have keyboards
attached. Select Do Not Report to suppress all error messages
relating to the keyboard or keyboard controller during POST.
This setting does not affect the operation of the keyboard itself if
a keyboard is attached to the system.
F1/F2 Prompt on
Error
(Enabled
default)
Enables the system to halt on errors during POST, which allows
the user to observe events that may scroll by unnoticed during
normal POST. You can select F1 to continue or F2 to enter the
System Setup program.
CAUTION: When setting this option to Disabled, the system
will not halt if an error occurs during POST. Any critical
errors will be displayed and logged in the system event log.
Option Description
book.book Page 60 Tuesday, March 31, 2009 5:26 PM

Dell PowerEdge R410 Specifications

General

Tcase	76 °C
Bus type	QPI
Stepping	D0
FSB Parity	No
Processor code	SLBF9
Processor cache	4 MB
Processor cores	4
Processor model	E5504
System bus rate	4.8 GT/s
Processor series	Intel Xeon 5500 Series
Processor socket	Socket B (LGA 1366)
Processor codename	Nehalem EP
Motherboard chipset	Intel® 5500
Number of QPI links	2
Processor frequency	2 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	42.5 x 45 mm
Processor front side bus	- MHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Thermal Design Power (TDP)	80 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	15
Memory types supported by processor	DDR3-SDRAM
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800 MHz
Memory bandwidth supported by processor (max)	19.2 GB/s
Maximum internal memory supported by processor	144 GB
HDD size	3.5 \
HDD capacity	250 GB
Optical drive type	DVD-ROM
Total storage capacity	500 GB
Maximum storage capacity	8 TB
Memory slots	8x DIMM
Internal memory	8 GB
Memory clock speed	1066 MHz
Internal memory type	-
Maximum internal memory	128 GB
Memory layout (slots x size)	4 x 2 GB
Maximum graphics card memory	8 MB
Graphics card	G200eW
Networking features	Gigabit Ethernet
PS/2 ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply	480 W
Compatible operating systems	Microsoft SQL Server 2008 R2/Windows Small Business Server 2008/Essential Business Server 2008/Server 2008 SP2, x86/x64/Server 2008 R2/HPC Server 2008; Novell SUSE Linux Enterprise Server; Red Hat Enterprise Linux.
Chassis type	Rack (1U)
Processor ARK ID	40711

Weight and Dimensions

Depth	430 mm
Width	630 mm
Height	40 mm