Dell U2211H User Manual

To attach the Soundbar:
Removing the Stand
To remove the stand:
1. Place the monitor on a flat surface.
2. Press and hold the Stand release button.
3. Lift the stand up and away from the monitor.
Wall Mounting (Optional)
CAUTION: DonotusewithanydeviceotherthantheDellSoundbar.
NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar only.
1.
Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
2.
Slide the Soundbar to the left until it snaps into place.
3.
Connect the Soundbar with the DC power connector.
4.
Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.
NOTE: To prevent scratches on the LCD screen while removing the stand,ensure that the monitor is placed on a soft, clean surface.
NOTE: This is applicable for a monitor with a stand. When other stand is bought, please refer to the respective stand setup guide for set up
instructions.

Dell U2211H Specifications

General

Brand	Dell
Model	U2211H
Category	Monitor
Language	English