Option Description
Trusted Execution This option specifies whether a Measured Virtual Machine Monitor
(MVMM) can utilize the additional hardware capabilities provided by Intel
Trusted Execution Technology. Default: disabled
Table 15. Wireless
Option Description
Wireless Device Enable Allows you to enable or disable the wireless devices
• WWAN (Default Enable)
• WLAN / WiGig
Table 16. Maintenance
Option Description
Service Tag Displays the service tag of your tablet.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
Table 17. System Logs
Option Description
BIOS events Displays the system event log and allows you to clear the log.
• Clear Log
Power events Displays the power event log and allows you to clear the log.
• Clear Log
Updating the BIOS
It is recommended to update your BIOS (system setup), on replacing the system board or if an update is
available. For tablet, ensure that the battery is fully charged and connected to a power outlet
1. Re-start the tablet.
2. Go to dell.com/support.
3. Enter the Service Tag or Express Service Code and click Submit.
NOTE: To locate the Service Tag, click Where is my Service Tag?
NOTE: If you cannot find your Service Tag, click Detect My Product. Proceed with the
instructions on screen.
4. If you are unable to locate or find the Service Tag, you can select your product from the products list
under the General Support.
5. Choose the Product Type from the list.
6. Select your product model and the Product Support page of your product appears.
7. Click Get Drivers and click View All Drivers.
The Drivers and Downloads page opens.
54
To Next Page
Loading...
Need help?
Display
Processor Options
