Dell Vostro 3300 - Display Assembly; Removing the Display Assembly

Back to Contents Page
Display Assembly
Dell™Vostro™3300ServiceManual
Removing the Display Assembly
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery.
3. Remove the base cover.
4. Remove the hard drive.
5. Remove the optical drive.
6. Remove the wireless local area newtork (WLAN) card.
7. Remove the keyboard.
8. Remove the wireless wide area network (WWAN) card.
9. Remove the palm rest.
10. With the right side of the computer facing up, disconnect the display cable from the system board.
11. Disconnect the camera cable.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.