Dell X95FF User Manual

Figure 95. Removing the Serial COM port
3. Tighten the screws and install the PCIe blank on the expansion card riser.
Figure 96. Installing the PCIe blank
Next steps
Replace the serial COM port.
Installing the serial COM port
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Lift the expansion card riser from the connector on the system board.
96
Installing and removing system components

Dell X95FF Specifications

General

Brand	Dell
Model	X95FF
Category	Server
Language	English