4040
REPLACING THE OVEN LIGHT
WARNING: Ensure the appliance is switched off before replacing
the lamp to avoid the possibility of
electric shock.
■ Let the oven cavity and the heating
elements to cool down.
■ Disconnect the appliance from the
electrical power supply.
■ Remove the protective cover “A”
(g. 46).
■ Replace the halogen lamp “B”
with a new one suitable for high
temperatures having the following
specications 220-240V or 230-
240V, 50Hz, and same power
(check watt power as stamped in
the bulb itself) of the replaced lamp.
IMPORTANT WARNING: Never
replace the bulb with bare hands;
contamination from your ngers
can cause premature failure.
Always use a clean cloth or gloves.
■ Ret the protective cover “A”.
NOTE: Oven bulb replacement is not covered by your guarantee.
STORAGE COMPARTMENT
The storage compartment is accessible
through the pivoting panel (g. 47).
Do not store
ammable material in the storage
compartment.
Figure 47
Figure 46
A
B
WRONG
CORRECT
To Next Page
Loading...
Need help?
General