CHANGING THE MENU
SETTINGS
Setting the clock
1. Press the P button to enter the menu;
2. Turn the selection knob until "Adjust Time" is
displayed;
3. Press the button;
4. Turn the selection knob to change the hours;
5. Press the button to confirm (or the
button to cancel the operation);
6. Turn the selection knob to change the minu-
tes;
7. Press the button to confirm (or the
button to cancel the operation);
8. Press the button to exit the menu.
Setting the language
1. Press the P button to enter the menu;
2. Turn the selection knob until "Set Language" is
displayed;
3. Press the button;
4. Turn the selection knob until the required lan-
guage is displayed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Setting automatic start up time
You can set the auto-start time in order to have
the appliance ready at a certain time (for example
in the morning) so you can make coffee immedia-
tely.
1. Press the P button to enter the menu;
2. Turn the selection knob until "Auto-Start" is
displayed;
3. Press the button;
4. Turn the selection knob to change the hours;
5. Press the button to confirm (or the
button to cancel the operation);
6. Turn the selection knob to change the minu-
tes;
7. Press the button to confirm (or the
button to cancel the operation);
8. Press the button to exit the menu.
After confirming the time, the red AUTO light on
the display comes on indicating that the function
is active.
To deactivate the function, select auto-start from
the menu and exit by pressing the button.
The AUTO icon on the display goes off.
NB! To activate this function, the time must
be set.
Descaling
1. Press the P button to enter the menu;
2. Turn the selection knob until "Descaling" is
displayed;
3. Press the button;
4. The message "Confirm?" is displayed.
5. Press the button to confirm (or the
button to cancel the operation);
6. Carry out descaling as described in the sec-
tion "Descaling" on page 49.
Setting the temperature
1. Press the P button to enter the menu;
2. Turn the selection knob until "Set
Temperature" is displayed;
3. Press the button;
4. Turn the selection knob until the required
temperature (high, medium, low) is displayed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Auto-Off
1. Press the P button to enter the menu;
2. Turn the selection knob until "Auto-Off" is dis-
played;
3. Press the button;
4. Turn the selection knob until the required
number of hours of operation (1, 2 or 3) is
displayed;
5. Press the button to confirm (or the
button to cancel the operation);
6. Press the button to exit the menu.
Setting water hardness
1. Press the P button to enter the menu;
2. Turn the selection knob until "Water Hardness"
is displayed;
3. Press the button;
4. Turn the selection knob until the water hard-
ness measured using the indicator strip is dis-
played (see paragraph "Measuring water hard-
ness" - page 39);
5. Press the button to confirm (or the
31
GB
To Next Page
Loading...
Need help?
Power
Capacity
Weight and Dimensions
