EasyManua.ls Logo

DeLonghi PAC AN125HPEC - Setting the timer; How to programme delay ON; How to programme delay OFF; MODELS WITH REMOTE CONTROL

DeLonghi PAC AN125HPEC
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
SETTING THE TIMER
The timer can be used to delay when the appliance comes on
or goes off. This avoids wasting electricity by optimising opera-
ting periods.
How to programme delay ON
Plug the appliance into the mains socket. It will be in STAND-
BY.
Press the timer button (D). The timer symbol (R) comes on.
Use the (F) or (C) buttons to set the number of hours
delay before the appliance comes on. They increase or
decrease the time in steps of an hour.
The appliance can be set to come on within the next 24 hours.
Five seconds after the timer has been set, the display dims and
the setting is memorised.
PLEASE NOTE: after setting, the operating mode and fan speed
can be modified.
To cancel the timer programme, press the timer button (D)
again.
Pressing the ON/OFF button (A) cancels the timer programme
and the air conditioner comes on immediately in the selected
mode.
How to programme delay OFF
Delay OFF can be programmed in any operating mode - air
conditioning/fan/dehumidifying.
Press the timer button (D). The timer on symbol (R) comes on.
Use the (F) or (C) buttons to set the number of hours
delay before the appliance goes off.
They increase or decrease the time in steps of an hour.
The appliance can be set to go off within the next 24 hours.
Five seconds after the timer has been set, the operating mode is
displayed and the timer symbol remains on.
At the set time, the air conditioner goes off and remains in stand-
by.
To cancel the timer programme, press the timer button (D)
again. The timer symbol goes off.
PLEASE NOTE: after setting, the operating mode and fan speed
can be modified.
Setting the timer
°F
MODELS WITH REMOTE CONTROL
Point the remote control at the receiver on the air conditioner.
The remote control must be no more than 16,4 ft (5 metres) away
from the appliance (without obstacles between the remote con-
trol and the receiver).
The remote control must be handled with extreme care. Do
not drop it or expose it to direct sunlight or sources of heat.
Replace the cover.
MAX 16,4 ft
MAX 5 metres

Related product manuals