6
en
French window
• After having screwed the window outlet 17 into the air
exhaust hose 12 , open the French window slightly and
position the window outlet 17 as shown in gure E.
SEMIPERMANENT INSTALLATION
If required, your appliance can also be installed semi-
permanently (Fig. F).
Proceed as follows:
• Drill a hole (ø134mm / 5.27 in.) in an outside wall or
through a window pane.
Respect the height and dimensions of the hole given in
gures F and G.
NOTE: As special tools are required for installation, we suggest
you have the appliance installed by specialized personnel.
KEEP THE AIR HOSES AS SHORT AND FREE OF CURVES AS
POSSIBLE TO AVOID CONSTRICTIONS.
• Fitthewallange11 into the hole.
• Screwthehoseadaptor 13 tothehose’send12.
• Fittheairexhausthoseinthehousingatthebackofthe
appliance as shown in gure A.
• Screwthewallmountingaccessory 14 into the hose 12
(g. H) and t it into the wall ange 11 as shown in g. I.
When the hose 12 is not tted, the hole can be closed with the
ange cap 11 .
NOTE: When installing the air conditioner semi-permanently,
you should leave a door slightly open (as little as 1/2“ (1 cm))
to guarantee correct ventilation.
Preparing for use
2
MAX 39 inches
MAX100 cm
MAX 14 inches
MIN 35 cm
134
5.27 inches
E
H
I
G
in the window pane
in the wooden
kickboard of a
French window
in the wall: you are
recommended to
insulate the section
of wall using suitable
insulation.
12 inches
30 cm
30 cm
12 inches
F