UNPACKING
Carefully unpack the drill press and all loose items from the carton. Figure 2 illustrates the drill press and all loose items
supplied with the machine. WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE DRILL PRESS TO THE
POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE READ AND UNDER-
STOOD THE ENTIRE INSTRUCTION MANUAL.
Fig. 2
A - Head Assembly
B - Column With Raising Rack
C - Table
D - Worm Gear For Table Raising And Lowering
Mechanism
E - Table Raising And Lowering Handle
F - Table Locking Lever
G - Base
H - Four Screws For Mounting Column
To Base
J - Three Allen Wrenches
K - Three Pinion Shaft Handles
L - Chuck Key
M - Chuck
To Next Page
Loading...
Need help?
General
